Correct Installation Method Of Automatic Oil Press.
Подписаться на разделFully automatic oil press is the most widely used equipment at present. After purchasing a fully automatic oil press, users face installation problems. Only after installation can the oil press operate normally. Benteng Machinery summarized the correct installation method of the automatic oil press.
Installation requirements for automatic oil press:
1. When installing the oil press, leave a space of 50-m away from the wall on the left side for the motor and replacement belts.
2. Leave enough space on the right side of the oil press to adjust the thickness of the cake and clean up the cake.
3. Adjust the machine so that the machine and the oil filter are in a horizontal position.
Correct installation method of auto oil press:
Before installation, the newly purchased oil press should be thoroughly cleaned. Pull out the main shaft, remove the upper squeezing cage, and use emery cloth to polish the outer and inner surfaces of the snail and the screw feeder smoothly. Add grease to all lubricating parts. The type and brand of the lubricating oil added in the gearbox should meet the requirements of the instructions.
After the round row is polished and cleaned, it must be arranged in the original position when installing the machine, and cannot be misaligned, because the arrangement position and order of the round row have a great influence on the oil extraction performance. After the machine is installed, it is compressed with a compression nut, and the degree of compression should be such that the disc can creep when the oil is squeezed. After the oil press equipment has been processed above, it can be fixed on the foundation with anchor bolts.
When installing, the pulley of the motor should be aligned with the pulley of the oil press, the position is appropriate, the direction of rotation is correct, and the tightness of the transmission belt should be adjusted appropriately.
Installation requirements for automatic oil press:
1. When installing the oil press, leave a space of 50-m away from the wall on the left side for the motor and replacement belts.
2. Leave enough space on the right side of the oil press to adjust the thickness of the cake and clean up the cake.
3. Adjust the machine so that the machine and the oil filter are in a horizontal position.
Correct installation method of auto oil press:
Before installation, the newly purchased oil press should be thoroughly cleaned. Pull out the main shaft, remove the upper squeezing cage, and use emery cloth to polish the outer and inner surfaces of the snail and the screw feeder smoothly. Add grease to all lubricating parts. The type and brand of the lubricating oil added in the gearbox should meet the requirements of the instructions.
After the round row is polished and cleaned, it must be arranged in the original position when installing the machine, and cannot be misaligned, because the arrangement position and order of the round row have a great influence on the oil extraction performance. After the machine is installed, it is compressed with a compression nut, and the degree of compression should be such that the disc can creep when the oil is squeezed. After the oil press equipment has been processed above, it can be fixed on the foundation with anchor bolts.
When installing, the pulley of the motor should be aligned with the pulley of the oil press, the position is appropriate, the direction of rotation is correct, and the tightness of the transmission belt should be adjusted appropriately.
| Источник: | BTMA-Correct Installation Method Of Automatic Oil Press |
| Учетная запись: | BTMA |
| Дата: | 07.12.21 |
